|
I like that idea for the course adjustments, I was hoping to keep the inside edges basically down, and be able to adjust down the outside edges, to try and keep all three tubes as close to the same distance as possible.
Front projection lenses might not be a bad idea, but that will then make for a longer throw, and it could make my light levels less efficient, Figure with the lower light output, I would benefit from the short throw distance.
No need for a mirror, as on the RPTV it bounces off a mirror to project to the back of the screen, so in a front projection setup, the mirror is not needed.
All ideas are welcome, and I know i will crack into something soon.
|