Quote:
Originally Posted by Kevin Kuehn
Very nice job on replacing those caps and resistors!  I'd agree the damper tube is generally responsible for those type defects on the left side of the picture. First thing I'd try is replacing the damper tube, possibly try a few. Adjusting the horizontal drive control could also have some effect. |
Ok. I got rid of the white vertical lines by adjusting the horizontal drive control. When I went to adjust I found that trimmer screw was completely missing. Stole screw from another from trimmer in tuner for channel that will not be used. Unfortunately I have other problems with set and have decided that I need to test all tubes before I go any further. I know someone at work that has a tester and will try to get this done shortly.