the 82k measured at 94k I went with a 120k. No drive bars, horz lin looks good,
21kv (with a 22meg on the ground side of the shunt) and the cathode is less that 180, about 178, which is about as low as I have seen on ANY of my color sets. there is a 'tiny' hint of a drive line that I can see on a blank raster, so I may go back to the 100k but will leave it be for now, and will check the fly temps as well.
The color looks good, but I still need to go over the purity and convergence again.
duh after looking a bit closer I think I am at 22.5kv the divisions are not 1kv I should have looked closer.
Last edited by DaveWM; 02-02-2013 at 08:06 PM.
|