Quote:
Originally Posted by JohnCT
When the grounds act up, they typically cause bit corruption in the eeprom (more often than not). Since there are no mechanical adjustments except F and G2, *any* adjustment including tuner alignment can be tweaked off.
First, go in the customer menu and see if the TV has a balance control. If it does, move it far left or far right and make sure it stops at either extreme. Often, the pointer will run through the stop and appear on the opposite side. Keep moving far left or right until the pointer gets "locked" inside the ends of the balance range. The pointer can often run through the stops several times before you get it centered. That might fix it.
John
|
I found the balance and ran it left and right. Stops where it should. All the way to the right, I have sound. All the way to the left, nothing.