[svhs]

CABLE ADAPTER JACK Connection for external antenna switcherCONTROL CONNECTOR

This 5 Pin DIN switches the coax input of the 1 X 4 Switch to one of the 4 coax outputs. The 1 X 4 Antenna Switch Control Connector may be connected to the 3 X 1 Controller / Switch 1 X4 Select 5 pin DIN output. Below is a picture that defines the function of the pins on the 5 PIN DIN.https://www.w2ihy.com/1-x-4-coax-switch.html

The 1 X 4 Coax Switch is designed to be used with the W2IHY 3 X 1 Controller. When the 1 X 4 Coax Switch is attached to the W2IHY 3 X 1 Controller the connectivity of the controller is significantly expanded. The 1 X 4 Coax Switch is built with a Rugged steel case and when used with the W2IHY 3 X 1 Controller


connects any one of 3 radios to any one of 3 amplifiers and/or up to 4 antennas

Capable of easily handling 10,000 watts PEP of RF.

Wall or desk mountable

Dimensions 6 ½ I” W x 1-5/8” H x 2 5/8” deep