|
Another solution, one I would use, would be to disable the HV system
entirely and find somewhere an appropriate Spellman HV-in-a-box supply and
use that until the correct working flyback turned up. And the HV regulation
would be spot on as these thing are really well regulated. I used to have several
... not on inventory! ... but they got thrown out by the disposal Nazis around here.
You can't hide a Spellman supply, just set in down on the floor of the cabinet.
This might cause a focus voltage headache however, and would of course
reduce the load on the whole horizontal system a lot and that would have to
be taken care of.
|