old_tv_nut, thanks for the quick reply and suggestion. This leads to more questions. My apologies for the very basic questions, I am in completely uncharted territory.
- Next step try connecting the B&K 415 output labeled "To Scope Horz Input" to the Oscilloscope "CH1 or X"
- I assume I can connect the scope probe to the B&K 415 cable as shown below, note this measures as a simple straight through cable
- I currently have just a single 10x scope probe, model 4904-2RA, specs here: https://store-9x7452d.mybigcommerce....ta%20Sheet.pdf
- I assume I need a second scope probe to connect "CH2 or Y" to the TV chassis test point C1
- Looking at the B&K 415 connection diagram it also shows connecting the "To Scope Vert Input", when would this be used, I would think this connects to the scope "CH2 or Y" input, this is confusing, don't I need to be measuring TV chassis signals?
