View Single Post
  #9  
Old 11-10-2018, 06:34 PM
Phil Phil is offline
VideoKarma Member
 
Join Date: Aug 2016
Posts: 132
Too late, maybe for a future trip?

I can't believe no one suggested a Sencore
VA48 or VA62. Either is inexpensive today
and really all you need, other that DMM, to
service basically any television. If you become interested in the earlier sets there
is an eprom for the VA62 described on VK to
do those as well. As for variacs, capacitor checkers, etc. my question is why bother. I always replace all electrolytics, paper caps,
check every resistor before ever applying power the first time. More often than not I get good picture and sound on first power up and all that is needed further is alignment.
I also always install a complete set of the best grade NOS tubes in any set I restore.
Some may think this extreme, but the advantage is this: instead of spending a huge amount of time trying to sort out every issue one at a time I take care of them all at once. Also, I can fully expect the set will function well in daily use for years to come.
Just a thought,
Cheers
Reply With Quote