View Single Post
  #14  
Old 09-10-2017, 03:54 PM
MIPS's Avatar
MIPS MIPS is offline
VideoKarma Member
 
Join Date: Jun 2014
Location: West Canadia
Posts: 1,006
Quote:
Originally Posted by Electronic M View Post
I wonder is there is a way reverse engineer it. Like reading the program off a MCU in the system or something?
I really need to see how the CO-V300 works. There are clearly four data lines going to and from the unit and I know 4-bit data buses exist for other embedded interfaces. It just makes things a little bit more complex.
If I had access to a working system I could attach a Logic Analyzer and just log the transmitted data as I entered regular commands form the controller. From there it is separating each portion of the command and repacking it for an Arduino to emulate.

Or of course, find a CO-V300.

As for reading commands directly from the onboard CPU that might be a challenge as the CPU and ROM appear to be integrated into the same chip. There might be data lines leaving the chip for whatever reason but the chip seems custom fabricated, else I would of expected something like an Intel MCS-48.
Reply With Quote