View Single Post
  #13  
Old 08-19-2013, 09:04 PM
TinCanAlley's Avatar
TinCanAlley TinCanAlley is offline
Duck, you sucker!
 
Join Date: Sep 2008
Location: So Cal, CA
Posts: 718
Quote:
Originally Posted by andy View Post
There is definitely something wrong if you can't get it any closer than that. It's normal for the opposite sides to interact a LOT. The left control will affect the right almost as much as the left. You have to alternate between them until you reach the best compromise. It's best if you ignore everything except the areas you're adjusting, then make small compromises reduce any major errors. Isn't there a top/bottom blue control on this set?
Well there are two (coil and pot) that work together to move the horizontal blue up and down from center towards the top and bottom of the screen. Then there's another pot that works with the coil just mentioned that adjusts the horizontal lines on the left and right sides of screen. Their interaction has to be going wrong somewhere as the red and green lines meet up on the sides.

The thing is, the compromise I've made is to allow the right and left to look like crap so I can get the center to look good since it's the main viewing area.
__________________
Pioneer SX-1080, Pioneer PL-115D, Pioneer CT-F9191, Pioneer RG-1, Wollensak 8050A, Akai 4000DS MkII, Pioneer CS-05 & Polk 1.2TL

Denon 5803A, Pioneer DVL-700, Pioneer CT-W603RS, Toshiba HD-A3, D-Link DSM-520, Dish VIP-722, Polk 1.2TL, CSi5, LS/fx, RT-800 and PSW-650
Reply With Quote