[MIPS]

The way I worked around the coarse convergence was that the innermost tube was fixed to the frame while the outer two were mounted with spring loaded bolts on the outside edges and two threaded adjustment knobs on the inside edges. Another two knobs would tilt the frame up and down on a welded-in piano hinge but I never got the keystone issue figured out. I found that for the short time that my STK convergence amplifiers were behaving it worked very well.


http://i11.photobucket.com/albums/a1...y/IMG_4525.jpg


http://i11.photobucket.com/albums/a1...t/IMG_5247.jpg


http://i11.photobucket.com/albums/a1...t/IMG_5277.jpg