Quote:
Originally Posted by DaveWM
you have to constantly touch up the static as you adj the dynamic, and I hope you did the purity 1st or you are wasting your time as a purity adj will throw ALL convergence off.
purity
center static
then the order in the sam on dynamic
touch up center as you go.
|
I did manual degauss using a coil, purity, grayscale, static and then dynamic. Was told that static doesn't need adjusting after being set and only dynamic should be adjusted.
The center of the screen looks just fine, it's the sides that are way off.
__________________
Pioneer SX-1080, Pioneer PL-115D, Pioneer CT-F9191, Pioneer RG-1, Wollensak 8050A, Akai 4000DS MkII, Pioneer CS-05 & Polk 1.2TL
Denon 5803A, Pioneer DVL-700, Pioneer CT-W603RS, Toshiba HD-A3, D-Link DSM-520, Dish VIP-722, Polk 1.2TL, CSi5, LS/fx, RT-800 and PSW-650
|