Thread: Chromacolor II issues
View Single Post
  #7  
Old 03-19-2018, 06:04 PM
Laserdisc's Avatar
Laserdisc Laserdisc is offline
VideoKarma Member
  
Join Date: Apr 2017
Location: Chattanooga
Posts: 53
I'm not sure how I'm going to check the resistor pack with the board plugged into the crt,but I'll go check g2 and edit this with the result.

Edit: ok I wasn't 100% sure which pin of g2 was the wiper with how it's layed out but none measured more than 130vdc.
Last edited by Laserdisc; 03-19-2018 at 06:12 PM.
Reply With Quote