View Single Post
  #27  
Old 02-20-2017, 06:34 PM
davet753's Avatar
davet753 davet753 is offline
David Thomas
 
Join Date: Mar 2013
Location: Knoxville, TN
Posts: 443
Be sure to check for cracked solder joints on the horizontal driver transformer. C5 was about the time Philips started using the driver transformers that had a metal pin on each corner of the frame (the windings soldered onto the top of the pin and the bottom of the pin came through the board)....it's a good idea to re-solder all 8 points.

A bad connection on that transformer will most always zap the horiz. output or more.
Reply With Quote