Quote:
Originally Posted by Phil Nelson
This TV has a non-polarized electrolytic across the vertical centering control:
The parts list describes the cap as "1 ohm Z @ 60 cycles, 3 volts N.P."
The original cap has been replaced with a polarized electrolytic: 1000 MFD / 6 VDC.
Is that an appropriate replacement? If not, what's better?
Thanks!
Phil Nelson
|
Phil,
If you need to replace it, it should be a non-polarized cap, usually 1000 to 1500uf. Unless the cap is shorted or completely open, I wouldn't bother replacing it. It is shunted by 30 ohms.
Chuck