Quote:
Originally Posted by dieseljeep
Remove the vibrator and connect 6vac to pins 3&6. With AC applied it should vibrate.
There's probably a heavy corrosion buildup on the contacts after so many years. If it doesn't buzz on AC, the coil is probably open.
Trying to remember after so many years.
|
Sometimes the contacts in vibrators are so corroded they won't vibrate even at 6V AC...the vibrator in my 47 olds radio needed close to 24VAC from my variac and some light knocking on it to wake it up... it isn't a bad idea to put a 6 or 12V turnsignal bulb in series as a current limiter during the AC wakeup cycle...it can also serve as an indicator if it started working.