[Crist Rigott]

I then turned my attention to the CRT/Yoke. I removed the CRT from the shell and gave the CRT a quick wipe down.
I replaced the 2 680 ohm resistors (both were within tolerance) and the 120pf 5KV capacitor. I used a 120pf 6KV cap for that.











I then cleaned up all the wiring and cleaned the connectors too. I then used my lacing cord to tie up each bundle neatly instead of the tape Philco used.



I then cleaned up the inside of the shell. It had a lot of "soot" in there. Now nice and clean.