|
Is the CRT filament lit? And is the ion trap in approximate position? I think they're pretty easy to fix. I found one behind an abandoned TV shop in a shopping center that looked like it had sat out in the rain for 6 months. After drying it out in my furnace room, I only had to change some hi value resistors and capacitors.
It should work on NTSC with no problem. The vertical gets its reference from the power line and you should be able to crank on the HORIZ control on the front panel to slow it down to the NTSC rate. To get the color to work, you'll have to change the 4.43 crystal to 3.58.
__________________
Last edited by kf4rca; 12-08-2018 at 02:26 PM.
|