Quote:
Originally Posted by Kamakiri
I need a set of legs for this identical set, if anyone has any  |
Quote:
Originally Posted by Electronic M
Check with Jim Menning. I sold him an identical empty cabinet that had legs.
|
Quote:
Originally Posted by WISCOJIM
That's a good suggestion. Didn't remember if it had legs with it or not. I'll be out at the storage building Sunday or Monday, and will look then.
|
Looking at 21-CT-55 pictures on the web, there appear to have been two different sets of legs that came on those. One set was wood with a brass ferrule at the end, and the other set of legs were completely brass. I didn't think the cabinet I had from Tom had legs on it as I remembered the cabinet being fairly close to the ground, but when I went to the storage bin today and looked, I got a surprise. This cabinet came with the brass legs, but someone had sloppily hack-sawed them to about 2 inches in length. I wonder if a previous owner had damaged the bottom of one of the legs, and then cut them all down to try to make them even. As they are, all they would do is gouge whatever floor they were on. So no, sorry, I don't have a good set of legs for Tim.
.