I like anything NOT involving heat but still nervous about handling a few really good Zenith jugs. The last three cataract removals were on RCA and GE replacement CRT's. I broke the safety glass on the FJ as it was 70% intact and there was no steady sun for weeks, so I used a heat gun. bad idea.
I just have to make it a point of getting some No 18 string and from what I understand, passing some low-voltage thru it for heating is unnecessary.
The silicone caulk I used to seal the edge of a 21FJ was white and I should have used clear as one little bit of caulk was visible after putting it back in the set. Clear tape that I used around the edge was similar to original.
__________________
"When resistors increase in value, they're worthless"
-Dave G
|