Quote:
Originally Posted by Phil Nelson
P.S. The resistance across L42 is 10.6 ohms, which doesn't seem outlandish. The schematics don't give a resistance for it, only the notation 12 muh.
|
Back in post# 149 you wrote,
Resistance from pin 3 to ground is zero, suggesting that L42 has continuity."
Since L42 goes to pin 3 (cathode), pin 3 should be showing 10.6 ohms to ground.
Were you measuring the coil with one end disconnected? If so, could there be a short inside the socket from pin 3 to ground?