|
Okay, the darn Postal Service can't even get a package here from FL without misrouting it to IL. Looks like my new HOTs won't be here until tomorrow or Thursday. In the meantime, I'm going to build me a dim bulb thingy. I have a ceramic ceiling socket, outlet and lamp cord. I will run the hot through the socket/filament and into the hot side of the outlet. The neutral goes directly to the neutral of the outlet. In the socket will be a 75w incandescent bulb.
Now from most of the replies I've seen about power usage for this chassis, the bulb should restrict the amperage to .62, is that correct? So there should be no risk of the unit drawing too much power and killing the new HOT, right? And what exactly happens if it tries? The bulb should be a full bright with the normal current draw of the chassis, so how do I know if it's trying to take too much? Is a 100w too much? I believe that would be a draw of .83 amps.
I'll post pics of it when I'm done.
__________________
Pioneer SX-1080, Pioneer PL-115D, Pioneer CT-F9191, Pioneer RG-1, Wollensak 8050A, Akai 4000DS MkII, Pioneer CS-05 & Polk 1.2TL
Denon 5803A, Pioneer DVL-700, Pioneer CT-W603RS, Toshiba HD-A3, D-Link DSM-520, Dish VIP-722, Polk 1.2TL, CSi5, LS/fx, RT-800 and PSW-650
|