Quote:
Originally Posted by TUD1
I didn't check the continuity, but I did spray it and move it back and forth a bunch. The Kill-A-Watt said that it drew 119 watts, .99 amp, and had a .97 power factor.
|
You can access the B+ where the voltage doubler diodes are mounted to the terminal strip on the top side of the chassis. B+ is the anode side of the one diode where the red (or orange?)wire heads off to the filter choke. Those diodes are M1, M2 on the sams schematic. Normally there's about 400 volts DC at that red wire.