Quote:
Originally Posted by timmy
i noticed that on the fd-10 when the back is taken off extreme care must be applied in putting the back, back on because the micro switch for uhf-vhf broke when i put the back on as i didnt line up the position of the swich relative to where the slider is on the cover. the micro switch has a very thin plastic tab and will break if you look at it the wrong way,lol as mine broke. so i put a little crazy glue to keep the switch in the vhf position.
|
Also I have noticed on the FD-10 and FD-2A that the cabinet plastic is relatively soft and the screws that go direct.y into the plastic can strip out easily. This does not seem to be a problem with the models that came before and after.