Quote:
Originally Posted by zeno
I dont remember one. If it does it may be a jumper.
Be sure the main B+ is right + or - 2%.
Be sure all 5 safety caps are new & the right type.
Check the base resistor & cap for the hoz output.
73 Zeno 
LFOD ! |
B+ is in spec, safety caps have been replaced and all electrolytic caps replaced. Is the H output cap one of the 'lytics? Haven't replaced the resistor.
Under most viewing I don't notice it, but there are many times it triggers my OCD. LOL
__________________
Pioneer SX-1080, Pioneer PL-115D, Pioneer CT-F9191, Pioneer RG-1, Wollensak 8050A, Akai 4000DS MkII, Pioneer CS-05 & Polk 1.2TL
Denon 5803A, Pioneer DVL-700, Pioneer CT-W603RS, Toshiba HD-A3, D-Link DSM-520, Dish VIP-722, Polk 1.2TL, CSi5, LS/fx, RT-800 and PSW-650
|