Quote:
Originally Posted by Username1
Really....? On the surface I think it would work.... But I can't see going above
20V..... Anywhere near max output with only the unit's fuse could put
2 - 3 or more amps into it.... Cooking it for sure I would think....
Have you actually done this....?
At the 20V I would be looking for just a small deflection, not full screen.....
|
Not direct to the yoke, but the primary of the transformer should be able to take it since the output tube should create a few hundred volts AC across it. The goal is not to hit max variac output, but rather to get 1-2 thirds deflection to confirm the transformer and yoke work....Once decent deflection is obtained more voltage serves no purpose.