Okay, so here's where I'm at with my selenium dilemma....
As posted in another thread, I'm replacing .320a selenium rectifiers, the rating chart is here:
http://www.videokarma.org/attachment...0&d=1380216772
These are the diodes I intend to use, 3 amp 1000 v. Since diodes are cheap, might as well step up the rating a bit, just for good measure:
http://www.mouser.com/ProductDetail/...fp8QPCBfkcQ%3d
Since this set isn't working, I'd prefer to just get a resistor value and replace it. It's been recommended to me that I get a 25 watt resistor as opposed to a 2 watt, because of how hot they run. Does that sound right?
And what value resistor would I run?