|
Guys, I'm a little confused here. Nick, you say the original tube is a 23CP4 and you are now using a 10SP4 with the same chassis. The 23CP4 is a 110 deg tube with a 1.125" diameter neck. The 10SP4 is a 50 deg tube with a 1 7/16" dia neck. I don't see how you could get a yoke that was intended for a 23CP4 to accommodate a 10SP4. The yoke for a 23CP4 is just too small in diameter to fit on to the neck of a 10SP4.
Am I missing something here? Also, the sockets are very different between these two CRTs.
Last edited by Tom9589; 09-03-2017 at 07:37 PM.
|