Quote:
Originally Posted by Electronic M
I've had a set work with it's original block caps....Albeit with terrible distortion, which changing those caps cured.
Paper caps are paper caps, even the best eventually fail. I'd bring a set with original block caps up on a variac any day, but I would not make it a regular player till those caps are re-stuffed.
|
Amen to that. At first I took the "wait and see" approach to the chocolate blocks, but after two of them failed during bench testing, I just restuffed them all. As you and others mentioned, it was super easy to do and the end result looks factory.
Quote:
Originally Posted by sean
For the grille cloth I used the Whiskey Rayon pattern sold by Richmond Designs. I thought he used to sell a smaller size than 18x24 but maybe that is what I had bought.
http://www.ebay.com/itm/182622096389
|
I used a similar, but slightly different, pattern from Richmond Designs on my restoration. I ended up with a ton of leftover grill cloth as well, but I don't see that as a problem!
Quote:
Originally Posted by Boobtubeman
Ive used the faucet washers to hold the tuning gang in place before
SR
|
You'd be amazed by the sheer amount of repro parts out there for these radios. I was able to find repro tuner grommets for mine, as well as a new frame for the grill cloth and a knob for the tone control. I think you can even buy a whole cabinet if yours is too far gone...