[timmy]

the problem here is ever since i replaced caps for the c2 and c3 multi caps with singles this seems to have happened, didnt have any of this befor and i also changed caps in the verticle section for a rolling problem but did not cure that but the set worked fine no blurr or focus problem and the longer it stays on the worse the screen gets. im thinking of putting back the wires to the old caps because i dont think the caps in the verticle section would do this, all the values were right on for that section. which video output tube would that be, video 1, or 1&2 or 2, or 3rd. and the kine bias is all the way down all adjustments were made and the bias did not need to be raised.