|
well the hv pot is good but i did find a possible mistake in the sams or the cap c3 which shows 50v 250uf but the cap shows 50v 50 uf and 250v 100uf but cap shows 250v 20uf this is not good even though the cap says what it says i put what the cap had on it but this set seems to be lacking power somewhere and i am not finding anything wrong and the only thing that is different is these 2 caps. im thinking the cap was marked wrong so im going to put in what the sams says. one of these caps go to 2 heavy resistors and a low uf cap just dont seem right these values are way off and again this all started after changing these caps and only diff is the 2 here. anyone ever run across something like a cap marked wrong like this? did this happen in old electronics of the 60s or earlier?
|