[fumplet]

looking for ceiling fan run caps but wow stores dont seem to sell them locally. Thought for sure Id drum one up quickly.
Fixed miswire of the 2Meg ohm and the 1 Meg ohm resistors off the 77 and 38 tube. Im hoping these arent 2000 and 1000 ohm and Im reading it wrong again as some of these sets meg meant K. Coming off the 77 tube screen is a 2 MEG and that goes to the screen of the 38 tube. I had the 2 MEG resistor going from plate to screen of the 77 tube. The 1 MEG resistor was also miswired. Now 1 MEG goes from screen of 77 to screen of 38 . The C bias for the 38 tube is 10.8 volts, not sure if .8 is close enough to the required 10 volts specified bias for 38 tube. Still very low output although slightly better after resistor miswire. j Also going to guess the .05 cap across the line isnt responsible for the extreme loss in volume.