|
Okay, got the safety caps in and double checked I didn't mess something up while cleaning. Made sure I didn't dislodge any transistors or cause any two or more leads to touch each other. All was well upon start up.
I used clip on leads on the center post of the G2 pots (that's the lead to the CRT socket). I measured each G2 to be between 426 with pot down and 752 with pot up. So I'm assuming those numbers are good.
Next...as I'm typing the set is warming up so I can try the grayscale again. Hopefully I can get the red raster line this time.
Wish me luck.
__________________
Pioneer SX-1080, Pioneer PL-115D, Pioneer CT-F9191, Pioneer RG-1, Wollensak 8050A, Akai 4000DS MkII, Pioneer CS-05 & Polk 1.2TL
Denon 5803A, Pioneer DVL-700, Pioneer CT-W603RS, Toshiba HD-A3, D-Link DSM-520, Dish VIP-722, Polk 1.2TL, CSi5, LS/fx, RT-800 and PSW-650
|