Quote:
Originally Posted by Electronic M
Yeah c5015 is connected across a winding of T5004 and unless the transformer is removed from circuit it's winding resistance will probably dominate any resistance measurements made across the solder pads of c5015...
|
Right. I pulled the Transformer off the board and measured the resistance/continuity between the 2 sets of 2 pins on the left side of the transformer and they are shorted. I guess my question is should they be this way? What I am really trying to do here is find out what is causing the noise in that area of the board and why its overheating the resistor in the same area. could the noise also be coming from the resistor? What would be the first logical thing to check as to what the cause of that is?