You don't need to open the can. The terminals to the silver can are on the CRT screen side of the chassis near the cardboard wrapped can. If they are hard to get at with the CRT installed then remove the CRT...To do that disconnect the side CRT HV lead, the CRT socket connector, and loosten the bolt on the yoke clamp then slide the CRT forward through the yoke...If it hangs up on the yoke back it up 2" and slip a card between the CRT and yoke...Push the CRT through the yoke primarily with the end of the bakelite CRT base to prevent ripping the base off if it hangs up in the yoke.
|