[Bill R]

I have a Sencore LC53 that I have a couple of questions about. First I know I do not have the correct low capacitance probe, but shouldn't it give a reading even if the value is off? Would the probe make a difference for capacitor leakage measurements? Currently I can connect the clips together and it will zero on inductance, but no change with probe clips disconnected when trying to zero for capacitance. The display comes up with 000 and does not change even with a known good capacitor. Leakage test shows 0000, even on known leaky caps. When checking value the correct led comes on for uf, and on leakage the indicator comes on for higher voltages.
Any ideas?