|
CTC-11
Michael,
The voltage at the grid of the 6DQ5 should be -57 volts. The voltage on the screen shud be +145 V. You should have +390 volts on the plate of the 6AU4 damper. In the first electrolytic cap of the power supply C125 (160 uF) positive lead to ground shud be +405 volts.
On the terminals on the PW600 horizontal oscillator board Pin A shud be +386 volts, and H +275 volts. Pin 6 (output plate) of the 6CG7 oscillator shud be +260. The other plate pin 1 shud be +24 V.
There is an R108 which is a 10K on the boost B+ line, one side goes to the blue wire on the deflection yoke.
I could scan the schematic and email to you if you want. Email me (not PM) your real email address which can handle large attachments.
Rob
|