Preparing for the new pots
Update February 26, 2019
From Mike: UPDATE, FEBRUARY 26, 2019, DAY 210.
“Greetings. I will be moving forward on a plan to install a new Focus pot and a new Convergence pot into the High Voltage cage. My exact plan is not yet in place, but it is close. The following pictures show preliminary steps for the process.
Pix. 1 New caps installed in high voltage cage.
Pix. 2 The old Focus and Convergence pots before removal.
Pix. 3 The old shaft drive system using slots in the fiberglass shafts where they mate with the old pot shafts.
Pix. 4 The slotted shafts that will need to be fitted with shims so that they will mate with the new pots later.
Pix. 5 The shafts with a piece of PVC sheet stock that will be used to make the shims.
Pix. 6 Shafts and new shims.
Pix. 7 Shims installed.
Cheers, Mike”
Go here for full resolution:
https://visions4netjournal.com/westinghouse/#
