Admiral 17T12.
I set up the 6BK4 on the 7053 CRT checker. Got the expected result on the shorts tests, but nothing on the beam current test. I put the multimeter in series with the anode and got about 45 volts. In the heater-cathode and grid-cathode positions I got 0.8 mA, but no current in the beam current test.
I'd like to try your suggestion for checking current with a CRT, but am I doing this right? I simply put the meter between the plug and socket in the anode pin position?
__________________
Winky Dink
Damn the patina,
Full speed ahead!
|