Then
1. Pry up the EPROM
2. Insert the EPROM but be careful not to end up with a bent pin like this shows
3.The installed V1 mod EPROM should look like this
If you have a 2716 EPROM burner you can unzip the attached zip of EPROM image files and burn your own. It include a .bin, .hex, and .s format of the EPROM. Version 1 of the EPROM modification was made for the VA62. The EPROM will also work in the VA62A if you burn it to a 2732.
You can put the case back together if you do not want to put in the manual DPDT switch RF-IF signal level switch. But then the low band early TV IF output comes out at an RF level (microvolts). I recommend doing the DPDT switch mod. This is described next.