Quote:
Originally Posted by vts1134
...My 185A section of the bleeder resistor is off from spec. I have a different version of the bleeder resistor in my set, it is only 160ohm instead of 230ohm. That puts it off by more than 20% so perhaps my problem is that resistor.
|
Well yeah, that would also result in higher-than-called-for current thru the entire series string which includes the focus coil (you were having trouble with the focus being out of range earlier, per your PMs). Try tacking some more resistance in series with R185 to bring it up closer to the called-for value.