View Single Post
  #17  
Old 02-23-2018, 06:52 PM
init4fun's Avatar
init4fun init4fun is offline
VideoKarma Member
 
Join Date: Mar 2011
Posts: 1,169
Quote:
Originally Posted by dieseljeep View Post
That radio is rather hard to get apart. How the dial pointer got lost or broken is any ones guess. Whether the tubes were replaced is another issue and that model doesn't use a 1U4. It is a sub, but not the proper tube.
Diesel , are you looking at the Monitor radio model M-510 ? Because the rider's shows it using a 1U4 for an IF amp , and this radio does indeed use a 1U4 in that position . I see that a 2.2meg is used as control grid bias for the 3Q4 and see a 1/4 watt in that position , but I still am looking for a 2.2 meg 2 watt in the schematic (In the pictures I posted in my last post you can see the 2.2 meg 2 wat that they installed , but there is only one 2.2 meg 1/4 watt listed on the schematic and it is present between the 3Q4's control grid and ground)

Last edited by init4fun; 02-23-2018 at 07:07 PM.
Reply With Quote