Thread: RCA Dimensia
View Single Post
  #29  
Old 11-16-2015, 06:40 AM
zeno's Avatar
zeno zeno is offline
VideoKarma Member
 
Join Date: Mar 2013
Location: New Hampshire
Posts: 4,721
IMHO true. The CTC175,6 & 7 CTC185,6 & 7 were average
reliability sets. If it wasnt for the connections & the RF
posts breaking off not may would have failed. Mostly
PS, Hoz & pin problems. Pix wise they were quite good & they
came anywhere from stripped down tuner only to higher end.
And you gotta remember other brands suffered from intermitant
tuners, Sony & MGA for starters. Sony used a combo tuner / IF
that was unrepairable & went from abt $60 up. Many failed & even
Sony couldnt tell us where the connections were. ( this is NOT
the int RF post problem).
Bottom line is cold joints happen to everything & kept us
employed. Even spots like the hoz drive that has a history were
almost never dealt with at the factory level.

73 Zeno


Quote:
Originally Posted by dishdude View Post
I thought the only real issue the Thomson sets had were the solder joints in that on board tuner they used.
Reply With Quote