Quote:
Originally Posted by JohnCT
Looks like the plastic is just stuck. Sometimes the release agent used in manufacturing isn't fully cleaned and this stuff sort of acts like a weak adhesive after years of humidity and close contact.
I think you're going to have to crack it open and hope you don't crack the plastic in the process. You can try heating the seam with a heat gun (carefully!) or a hair dryer. If nothing else, the heat might prevent the plastic from cracking.
Good luck.
John
|
I have another radio, similar but a little older. I thing has one more screw holding the back and I removed them all. Same thing!
The back doesn't appear to be stuck around the edges. I can pry it open slightly on all sides. It seems to be held in the center.