Quote:
Originally Posted by albanks
Thank you for the help. I am working on setting up a work area in the cellar then I can take more pics as I go. I don't want to open the set up again in my apartment as it is generally very dirty and crud always falls over the place.
|
One of the first things you should do is clean the chassis. Some of that dirt may be conductive and lead to problems. You can use compressed air if you are careful. Don't hit the speaker or the DAG with high pressure air for instance.
Another way is using a vacuum cleaner and a soft brush (paint brush). Don't suck the Dag off the CRT.
A limited amount of window cleaner can be used but don't go near the tube numbers. The tube numbers can sometimes come off if you touch them.
It would be better if you worked on some radios first to get the hang of things.