Quote:
Originally Posted by colectorad
 
^Here's a neat AM/FM portable with a few quirks outside of following the Panasonic tradition of losing its' carrying handle...
The band switch lost traction to the point of being immovable without being pressed from its' base. Some white lithium grease cleared that up.
The green (audio output?) transformer had one of its' leads floating against its' solder joint, resulting in intermittent audio. Re-seating the transformer and adding new solder yielded solid output.
^Here's an after (left) and before (right) shot of the flat-side battery terminals. It's amazing what a screwdriver, contact cleaner, cotton swabs, and steel wool can do.
Loading the line cord into its' storage bay is an act worthy of a cheap magician. Just add "the great" to your name, gather a meager audience, and tell them they're about to "see an AC line cord tediously disappear". Your career in "magic" will be very short, of course. So will your patience with the small storage bay and long AC cord. |
The newer radios use those stiff, double insulated cords. Try stuffing those in a small place. Twenty pounds of dirt in a five pound bag.
