I have now replaced all the 450 volt (B+) electrolytics, C127, C142, C101, C126.
The first two are cans in the main part and were restuffed. C101 was not resutuffed
because the tabs were too stiff to twist into removal position. C126 was not resutffed out of "symmetry" with C101, and there's a nice spot for it.
The two 0.05 uF caps in the preamp area were replaced with modern ones (C113 and C114).
I have not decided whether to replace the LV (15 volt) electrolytics, C147 and C115.
C115 would be easy, C147 even more impossible than C101, to restuff, so if
they are bad they will just have their wires cut and the replacements
tacked in. These caps are usually OK.
|