View Single Post
  #4  
Old 07-22-2017, 06:47 PM
Winky Dink's Avatar
Winky Dink Winky Dink is offline
VideoKarma Member
 
Join Date: Apr 2010
Location: Meridian, Idaho.
Posts: 583
I think the volume control pot is part no. 3076, which is 10K ohms. If you're at 20K and want to reduce the resistance, you can sprinkle powered graphite on the carbon element and burnish it with a smooth instrument. If the resulting resistance is too low, just lightly wipe off some of the graphite with cotton. Keep adjusting that way until the resistance and taper are satisfactory.
__________________
Winky Dink
Damn the patina,
Full speed ahead!
Reply With Quote