|
If the yoke is an "iron wire" type, the iron wire making up the core will make the windings shrink and get stuck to the neck of the picture tube. I fought with my Admiral and ended up losing the vacuum in the CRT when I accidently pulled the CRT socket off when I tried to put the yoke over it. I got a replacement that had an iron wire yoke (stuck also) and unwound the wire and got it off. I also had to get a replacement yoke for the admiral. Be careful and if you don't have to, leave the CRT/yoke alone for now. If the variac test shows the yoke bad, you'll have to take it apart to get it off.
The resistors were around 22 ohm 5 watt. Check the B+ after you install them. It looks like you have a good number of bad capacitors in the set. I completely recapped mine before I started to troubleshoot.
|