Quote:
Originally Posted by Electronic M
You'll probably have better luck searching for a replacement based on resistance (include taps if present), shaft length/type and mount style....the Zenith part may be long past unobtainium status, but there were probably several other makes that used a compatible part... even if there was not a similar part in other makes many pot kits gave one the ability to build up the correct pot from parts like Legos.... some antique radio pot dealers have the kits to build up a custom part.
|
The SM says it is 40K. Looks like it has three taps (two are tied together) and two wires connected. The shaft is just in the 1" range. I haven't found one that comes close enough to the resistance with that short of a shaft.
__________________
Pioneer SX-1080, Pioneer PL-115D, Pioneer CT-F9191, Pioneer RG-1, Wollensak 8050A, Akai 4000DS MkII, Pioneer CS-05 & Polk 1.2TL
Denon 5803A, Pioneer DVL-700, Pioneer CT-W603RS, Toshiba HD-A3, D-Link DSM-520, Dish VIP-722, Polk 1.2TL, CSi5, LS/fx, RT-800 and PSW-650
|